No Flow Required!
Potter's Auto-Test VSR is a new and innovative way of performing a flow test without flowing water, promoting water conservation and reducing corrosion.
The models PBA-AC and MBA-DC vibrating type bells are designed for use as fire, burglar or general signaling devices. They have low power consumption and high decibel ratings. The unit mounts on a standard 4" (101mm) square electrical box for indoor use or on a model BBK-1 weatherproof backbox or BBX-1 deep weatherproof backbox for outdoor applications. Weatherproof backbox model BBK-1, Stock No. 1500001.
Codes and Approvals
Bells: UL Listed/FM Approved indicating appliances of the vibratory or motor bell type shall be furnished and installed where indicated on the drawings, and as required by NFPA Standards. Models shall be available to match voltage sources for 24 or 120 VAC, 12, or 24 VDC operation. Models for use on DC shall be polarized for supervision. All bells shall include transient voltage suppression. Models shall be available with 6, 8, or 10 inch gong sizes to meet various decibel requirements of the installation. Gong shall be constructed of steel with a red baked enamel finish. Bells shall surface or semi-flush mount on standard 4 inch square electrical boxes for indoor use. For outdoor use a custom weatherproof backbox shall be available. Bells shall be Model PBA for AC use or Model MBA for DC use, both manufac¬tured by Potter Electric Signal Company.
Additional Information for Engineers:
Click here to view the PBA-AC and MBA-DC datasheet.