No Flow Required!
Potter's Auto-Test VSR is a new and innovative way of performing a flow test without flowing water, promoting water conservation and reducing corrosion.
Potter's Auto-Test VSR is a new and innovative way of performing a flow test without flowing water, promoting water conservation and reducing corrosion.
Potter's non-proprietary solution provides a better way to manage a network of fire alarm systems from one location.
The Potter AquaN2 Kit is designed to quickly and effectively purge oxygenated air from a wet fire protection system and replace it with high purity nitrogen gas.
The non-corrosive saddle bushing inside Potter's VSR Series flowswitch prevents corrosion and ensures lasting protection.
Potter's all new AFC Series addressable systems range from 50 addresses to 1,270 and utilize the NEW Potter PAD protocol!
Potter's IntelliGen™ Nitrogen Generator Systems provide a low cost, reliable, and efficient method of producing up to 99% pure nitrogen on-site at the point of usage.
Have a question, comment, or request? Send us a message!
Customer Service:
800-325-3936
or 314-595-6900
Technical Support:
866-956-1211
Fax:
800-768-8377
Hours: 8:00am - 5:00pm CDT
Corporate Headquarters
5757 Phantom Drive, Suite 125
Saint Louis, MO 63042
Production Facility
1609 Park 370 Place
Saint Louis, MO 63042
Potter Announces Addition to IntelliGen™ Line of Nitrogen Generators
Announcing the release of the INS-100 and INS-250. These two units are the latest in the line of Potter …
Potter Announces New Line of Fire Systems
Potter is proud to announce the launch of the AFC Series of Addressable Fire Panels and ARC-100 Releasing …
Potter Electric Adds Capital, Focuses on Growth
Potter Electric Signal Company, LLC of St. Louis, Missouri USA, announces a partnership with Gryphon Investment …
The Potter AVSM synchronization control module is designed to provide an easy way to synchronize multiple horns, strobes, and horns/strobes using only two wires in isntances where a synchronized flash is required. When synchronizing multiple horns and horn/strobes there is the ability to silence the horn while allowing the strobes to continue to flash. Incorporating the control module as shown in the following diagrams, the control module will control the power to the signaling device to produce synchronized operation. The AVSM module is shipped with a back box and cover plate. A green LED status indicator will flash once every four seconds if zone 1 is operational. The LED will flash twice every four seconds if zones 1 and 2 are operational. Strobes should not be used on coded or pulsing signaling circuits.
To view updated tracking on your order, please enter your customer purchase order number.
Please allow at least 24 hours from the time of order for shipping information to be available. For more information or questions about tracking, contact customer service at 800-325-3936.