Potter Electric Signal Company announces the SCA-5070INT 50W Integrated Amplifier that …
Nitrogen Generator with 1,000 Gallon Largest Riser Fill and 3,400 gallons of Total Sprinkler System Capacity
Potter's IntelliGen® Series of Nitrogen Generators are specifically designed to generate on-site, 98%+ purity nitrogen for use in fire protection sprinkler systems. When used as a supervisory gas in fire sprinkler systems, nitrogen slows corrosion, improves the life of your system, and lowers maintenance costs.
The INS-1000 utilizes nitrogen membrane technology for gas separation. Nitrogen membranes are highly effective and a cost conscious way of producing on-site nitrogen. Acting as a gas filter, the nitrogen membrane separates the oxygen and water vapor molecules in the air from the nitrogen molecules. The high purity nitrogen gas is then piped through the air maintenance device and into the fire protection system. As the system fills with nitrogen, the remaining oxygen molecules in the fire protection system are exhausted by using the Potter IntelliPurge® Nitrogen Purge Valve. The Potter IntelliPurge® Nitrogen Purge Valve monitors the fire protection system to ensure high purity nitrogen is consistent throughout the sprinkler system.
The INS-1000 is a fully assembled package ready to be connected to a new or existing fire sprinkler system. This turn-key system includes an integrated air compressor, nitrogen membrane, all air filtration equipment, tanks and the Potter IntelliGen® Controller.
The Potter IntelliGen® Controller ensures the contractor the easiest setup and operation of any nitrogen generator system in the industry. Each unit is designed to be turned on and walk away. The built-in monitoring capabilities will make corrections and alert you to any necessary changes.
- Potter’s IntelliGen® Controller (Patent Pending)
- Fully automates the air fill and nitrogen fill procedure
- Advanced leak rate detection
- Integrated Bypass alarm
- Web Enabled – system can be monitored anywhere there is internet connectivity
- Automatically e-mails trouble alerts and maintenance reminders
- Integrated 2 HP oil-less air compressor included to meet NFPA 13 required 30 minutes fill for 1,000 gallon system at 40 PSI.
- Handles up to 3,400 gallons of total sprinkler system capacity (based on NFPA 13 allowable leak rate of 1.5 PSI per 24 hours for a new sprinkler system).
- Skid mounted unit – easy plug and play installation.
- 20 gallons air tank and 20 gallon nitrogen tank.
- Form C dry contacts for Building Management System (BMS) notification.
- FM Approved per Approval Standard 1035, Nitrogen Generators.
For more information on our Nitrogen Generators visit our Corrosion Solutions Portal.
Documents & Resources
|Potter IntelliView® Learn More|
Potter Academy Training
This product is featured in the Potter Academy training hub. To get started, click a course below or to learn more about Potter Academy, click here.
- Corrosion & Corrosion Solutions Curriculum
- Corrosion and Corrosion Mitigation Overview
- INS 500 & INS 1000: Filling the Sprinkler System
- INS 500 & INS 1000: Initial Setup
- INS 500 & INS 1000: Nitrogen & Purity Test
- INS 500 & INS 1000: Physical Installation
- INS 500 & INS 1000: Purging
- INS 500 & INS 1000: Wiring
- INS-500 & 1000 Maintenance
- Potter Nitrogen Generators Overview