We are excited to announce the Auto-Test Pressure Switch (ATPS), the latest addition to its …
V9 and later will no longer support Windows Operating Systems prior to Windows 10.
05/22/2024
New |
IntelliCom SIA configuration |
Improved |
Hide unused IntelliCom account field |
Improved |
Default to all IntelliCom signals selected |
04/04/2024
New |
Added Fire Service Access Elevator (FSAE) zones and point functions. |
Fixed |
Resolved potential issue when opening a panel configuration file from an email attachment. |
Improved |
Increase allowed User Codes to 250 |
Improved |
Increase allowed Audio Patterns to 293 |
Improved |
Increase allowed Audio Messages to 1000 |
Improved |
Decrease Audio Pattern Row height by about 20% |
Improved |
A new panel configuration will default to the Time Zone of the PC. |
Improved |
Added warning that amplifiers will be changed to dual channel which switching from single channel audio system to a dual channel. |
Improved |
Made order of items in the Point Types drop down and Point Type selection menu consistent. |
Improved |
Added zone number and point address to various locations in the zone configuration. |
12/04/2023
Fixed |
A VM-1000 attached to an AFC-1000 could not be configured under certain circumstances |
10/25/2023
New |
Added support for Wheelock T4 Sync |
Improved |
Various quality of life improvements |
08/01/2023
New |
Support IntelliCom |
New |
Support password protection for panel configuration files |
Improved |
Various quality of life improvements |
04/27/2023
New |
Added general setting for the network audio port |
New |
Added audit error is network paging zone configured and no VM-1000 |
New |
Added network page zone style |
New |
Added network paging override alarm setting |
New |
Enabled Ethernet settings for all VM-1000s |
New |
Only allow reference points of style network paging in network paging zones |
New |
Support auto update for future versions of the tools |
Fixed |
DACR report correctly generates reports when the format is set to "SIA-Limited" |
Improved |
Loading time for application improved when unable to connect to Internet |
Improved |
Removed dialer options pertaining to answering the phone for remote programming |
12/05/2022
07/25/2022
New |
Ability to export point list. File > Create Point Report |
New |
Ability to Open file from and Save files to IntelliView |
New |
Output activation delay max setting increased from 600 to 900 seconds |
New |
Support for Windows 10 and 11 only. Support for older operating systems has been removed. |
New |
Removed capability to transfer the panel program via modem. |
Fixed |
Previously, when the user clicks on a panel in the network and then clicks back to the Network Setup tab each time the user clicks back to the Network Setup tab another copy of a panel will be added when the user Uploads and Adds a panel. So if the user clicks back and forth between network setup and a panel tab 5 times than 6 copies of a panel will be added when they perform an upload and add panel. |
Fixed |
The workaround either to close and reopen the configuration before uploading and adding a panel or to delete the extra copies of the panel. |
Improved |
New color scheme |
Improved |
Removed audit error when type Contact Input Disable Outputs assigned to a zone type of Alert |
Improved |
When configuring central station reporting, if the configuration is set to report multiple panels through one panel (either using MC-1000 modules or networked panels) for Contact ID by point, generate an Audit Warning. This will allow the configuration to be sent to the panel(s). Previously, this configuration generated an Audit Error and prevented downloading the configuration to the panel. |
02/28/2022
Improved |
Allow configuring multiple IPA-4000V panels (or multiple AFC-1000V panels) in a single building. Previously user was only allowed to configure a single panel with a VM-1000 per building. |
Improved |
Allow the CO sensor in the PAD-PCD (split) configuration to be added to a supervisory zone. |
11/23/2021